Outdoor Stage hire

ALUMINIUM TRUSS: A CONVENIENT SOLUTION

Aluminium trusses were originally invented to make the work of technicians in theatres, indoor & outdoor stage systems, television studios and at rock concerts easier.
Today however they are spreading to all sectors where structures have to built for hanging lights, equipment, false ceiling, stage sets.
They are aesthetically pleasing, light and sturdy, and can also be used to build ground support for catwalks, fair stands, in showroom, in shops, in modern cinemas, in entertainment establishments, in large sports complexes,to support large advertising panels, and in multipurpose halls such as railway and airport concourses.

Bes systems carry a vast selection of Litec/Manfratto box truss which includes the following:

ADO, the solution For all 90° corners and crosses

Managing corners and crosses is one of the biggest problems structure installers and hirers have to face. Dado is the answer.
Dado is the answer. It is devised around a six-faced die-cast cube and may be put together in multifarious ways leaving the user complete freedom. With Dado it is no longer necessary to plan the purchase of set standard corners: all you have to do is invest in a few basic modules which you can arrange as needed.

Each individual junction is assembled with reinforced tubes without welding.
The connection between DADO and the trusses is the quick-fit type, with special steel halfspigots. Their assembly and
alignment is made easy with an assembly template.

K8 is the DADO version for square section truss:m: A special reinforced tube, made to our specifications, together with the sturdiness of the six-faced cube mean that Dado is even more rigid than traditional corners, which makes the whole structure even sturdier.

K4 is the DADO version for square and flat section truss: The possibility of combining square and flat trusses is an important feature of DADO.

K2 is the DADO version for flat section truss: Grid structures are increasingly used and this possibility is another DADO feature. 
 

Litec QSX30S Square section aluminium truss with 29 cm long sides.

This is Litecs best selling and most widespread model.
Its excellent size, weight, cost and performance characteristics are its key to success.
It is made of 6082 extruded aluminium alloy, with high
load-bearing and twisting strength.
 
Main characteristics:
Chords: extruded tube ø50x2mm - EN AW 6082 T6
Diagonals: extruded tube ø18x2mm - EN AW 6082 T6
Ends: aluminium casting plate - EN AC 42200 T6

 

Litec FX30 Flat section aluminium truss with 29 cm long sides.

Flat truss made of 6082 aluminium alloy with 30 cm sides.
 
Main characteristics:
Chords: extruded tube ø50x2mm - EN AW 6082 T6
Diagonals: extruded tube ø18x2mm - EN AW 6082 T6
Ends: aluminium casting plate - EN AC 42200 T 

Bes Currently Stock:

• Litec QX30S 0.5m Sections

• Litec QX30S 1.0m Sections

• Litec QX30S 2.0m Sections

• Litec QX30S 2.5m Sections

• Litec QX30S 3.0m Sections

• Litec QX30S 30 degree Arc 4m sections

• Litec QX30s 16m 30 degree circle

• Litec FX30 .5m Sections

• Litec FX30 3.0m Sections

• Litec K8 DADO corners

• Litec K4 Dado Corners 

Complete stage systems:

Litec ARC Stage - 8m x 6m Roofing System manufactured by Litec

Litec Gable Stage - 5.6 x 3.6 gable roofing system made up by litec truss